Set up an auto-attendant menu
An auto-attendant answers a call with a greeting and lets the caller press a key to reach the right person or team.
Create the menu
- In the menu, click Call flow.
- Click + Auto-attendant. A card called New menu appears.
- Click the card to open its settings, and give it a clear Name, for example "Main menu".
- Under Greeting, click Upload audio and choose your file, or pick a recording you already uploaded.
- Under Menu options, add one line per key:
- Open Add option — choose destination… and pick where the key goes, for example the "Sales" ring group. A new line appears with the next free key.
- Change the key in the small box at the start of the line if you want a different one, for example 1.
- Repeat for each key.
- In Exit action (no key pressed), choose where callers go if they press nothing, for example reception. Hang up (default) ends the call.
- Optional: Timeout (ms) is how long the menu waits for a key after the greeting, in milliseconds. 3000 means 3 seconds.
Each option also appears as an arrow on the canvas.
Send calls to the menu
- Click the Number card that should play the menu.
- In Send the call to …, choose your menu.
- Click Save draft, then Publish.
- Call the number from a cell phone and try each key.
If it doesn't work
| Symptom | Likely cause | What to do |
|---|---|---|
| The greeting upload fails | The file is not WAV or MP3, or is larger than 10 MB | Export the file again as MP3 and upload it. |
| A key does nothing | That key has no option, or the change was not published | Add the option, then Save draft and Publish. |
| Callers are cut off after the greeting | Exit action (no key pressed) is Hang up (default) | Choose a destination such as reception or voicemail. |
| "This menu already has a timeout route" | You drew a second "no key" arrow | Remove the old one first. |