A schedule decides whether you are open or closed when a call arrives. You set the hours on the Schedules page, then choose on Call flow where calls go in each case.

Create a schedule

  1. In the menu, click Call flow. Schedules appears under it. Click Schedules.
  2. Click + New.
  3. In Start from, pick an example close to your hours, or Blank (always closed).
  4. Type a Name, for example "Office hours". You can leave Extension empty.
  5. Click Create on phone system.

Until you route it on Call flow, calls that reach this schedule hang up.

Set your hours and holidays

  1. On the Schedules page, click your schedule.
  2. To add open hours, click + Add hours. Click the days, then set Opens at and Closes at. Use 23:59 for "until midnight".
  3. To add a holiday, click + Add holiday and pick the Date. Use Until (optional) for several days in a row.
  4. Check the order. Rules are checked from the top, and the first one that matches wins. Put holidays above your weekly hours.
  5. Click Save to phone system. The change is live right away.

Check the time zone

Above the rules, the editor says Times are in followed by your time zone, for example America/Toronto. If it is not your local time zone, contact support before relying on the schedule.

Use the schedule on Call flow

  1. Open Call flow and click + Schedule.
  2. In Add a schedule, pick your schedule.
  3. Click the Schedule card. Choose a destination for Open hours go to, Closed goes to and, if you want, Holidays go to (optional).
  4. Route your Number card to the schedule.
  5. Click Save draft, then Publish.

If it doesn't work

Symptom Likely cause What to do
Calls go to "closed" during open hours A rule above your hours matches first, or the time zone is wrong Keep holidays above your weekly hours. Fix or remove the rule that matches by mistake, such as a holiday on the wrong date, and check Times are in.
The schedule shows Routes to nowhere It is not routed on Call flow yet Set its destinations on Call flow and publish.
The schedule shows Turned off Turned on is unticked in its settings Open it, tick Turned on, and save.
You can't change a schedule It uses settings the portal can't edit It keeps working as set up. Contact support to change it.